Part Number : CT-RGB-DC83
|
 | - Input : 12 Volt DC (12v transformer included)
- Connection Mode : Common Anode (+)
- Output : 5V DC (2 SPI Signals)
- 6 Buttons on controller or Wireless RF Remote Controller
- 12V 23A Battery required for remote controller
- Overall Size : 94mm(L) x 59mm(W) x 25mm(H)
- Output Patterns : 83 color changing or chasing
- Use to control our 5V DC dream color rgb chasing led strips.
|
|
|
$39.50
|
|
Part Number : CT-RGB-TC
|
 | - Input : 12V DC - 4 Amps per Channel (12 Amps total) ; Or 24V DC - 6 Amps per Channel (18 Amps total)
- Can work with any of our RGB Led Strip Tape
- Touch to select a static color + remote controller function
- 24 static single color and 2 dynamic color changing
- RF Remote Control - 433 MHz Frequency
- Common Anode (+) , R,G,B three channels
- Use 2 x AAA Batteries
- Output Power 216 Watts
- Turn On - When on in static color, press again to dynamic changing modes
|
|
|
$39.95
|
|
Part Number : CT-RGBWPRF
|
 | - 4 Amp per Channel (12 Amp Total)
- Works with URGB30SA + URGB60SA +URGB150WP
- Controller Size L121mm x W53mm x H25mm
- Static power consumption <1W
- Complete with RF remote Control
- 25 Colour Changing Programs
- Brightness control + Program Speed Control
- Includes extra wall panel remote control (RF)
|
|
|
$49.95
|
|
Part Number : CT-308RF
|
 | - 4 Amp per Channel (12 Amp Total)
- Works with any of our rgb led strips / modules / bars
- Controller Size L121mm x W53mm x H25mm
- Static on selected color (power consumption <1W)
- Complete with RF remote Control
- 25 Colour Changing Programs
- Brightness control + Program Speed Control
- Turn On/Off + Pause
|
|
|
$39.95
|
|
Part Number : CT-308
|
 | - 4 Amp per Channel (12 Amp Total)
- Works with any of our rgb led strips / modules / bars
- Controller Size L121mm x W53mm x H25mm
- Static on selected color (power consumption <1W)
- 25 Colour Changing Programs
- Brightness control + Program Speed Control
- Turn On/Off + Pause
|
|
|
$36.00
|
|
Part Number : CT-RGBAUD
|
 | - Size L130 x W64 x H24mm
- 4 Amp Per colour Red / Blue / Green (12 total)
- 12v or 24V DC
- Long distance RF remote control included
- 6 Buttons On / Off / Mode / Brightness + and - / Speed + and -
- Full Audio Control Either with the built in Mic or Audio Jack plug in.
- Microphone sensitivity Control dial
|
|
|
$49.50
|
|
Part Number : CT-IR44KRGB
|
 | - 16 colors and 5 light patterns (Static, Flash, Strobe, Fade Change and Smooth Change)
- 16 levels of dimming control in static mode
- 16 levels of speed control in flash, strobe, fade changing and RGB smooth changing mode
- Increase and descrease Red, Green and Blue color to custom a level
- Save your desired color with the 6 DIY buttons on the remote
- Input : 12V DC ; Output : 12V DC 3*2A (72 Watts)
|
|
|
$29.50
|
|
Part Number : CT-RGBDIAL
|
 | - Simple unit with 3 Dials (R/G/B)
- Just increase or decrease the amount of Red Gree and Blue (Can make different colors)
- Maximum 3 Amps per channel (3000ma) (9 amp for all 3 colors)
- This unit does not auto colour change
- 165mm Long x 83mm Wide x 59mm High
|
|
|
$29.95
|
|
Shopping Cart 
